3D Printed Partials
3D Printed Flexible Partial
A metal-free removable partial designed on the scan and printed in flexible resin — teeth in VITA shades, gingiva in matched pink, no clasps to show.
DigitalScan or impression
Learn moreStart a case
Digital / Appliances
Digital Appliances
Bands sintered in metal straight from the scan, printed models for fabrication, and digitally designed appliances produced from your file. Because the design is kept, a replacement two years from now comes off the same record rather than a new impression.
16 appliancesLaser Sintered Appliances · 3D Printed Partials · Printed Model Services
16 appliances
3D printed 3D printed 
Laser Sintered Appliances
All-Metal Sintered Hawley
A Hawley with the palate, clasps and bow printed as one piece of metal — thin, rigid and impossible to snap at a solder joint.
DigitalScan or impressionLearn moreStart a case
Printed Model Services
Horseshoe Model
Printed horseshoe model, supplied singly or as an upper and lower set.
DigitalScan or impressionLearn moreStart a casePrinted Model Services
Indirect Bonding Trays
Brackets positioned digitally on your scan and delivered in a printed transfer tray, so bonding is one seat per arch.
DigitalScan or impressionLearn moreStart a casePrinted Model Services
Low Profile Base Model
Printed model on a low profile base, supplied singly or as an upper and lower set.
DigitalScan or impressionLearn moreStart a casePrinted Model Services
Pour Model from Impression
Stone model poured from an impression supplied with the case.
DigitalScan or impressionLearn moreStart a casePrinted Model Services
Printed Model for Appliance Fabrication
Printed working model produced from your submitted scan for appliance fabrication.
DigitalScan or impressionLearn moreStart a case3D printed Laser Sintered Appliances
Sintered Distalizer Anchorage
Printed anchorage for pendulum and distalizing designs, with the springs and acrylic added at the bench.
DigitalScan or impressionLearn moreStart a case3D printed Laser Sintered Appliances
Sintered Habit Appliance
Tongue crib or habit cage printed with its bands as one frame.
DigitalScan or impressionLearn moreStart a case3D printed Laser Sintered Appliances
Sintered Herbst Anchorage
Printed crowns and bands for Herbst anchorage, with the telescopic hardware fitted at the bench.
DigitalScan or impressionLearn moreStart a case3D printed Laser Sintered Appliances
Sintered Lingual Holding Arch
Lower holding arch printed as a single frame from the scan, sized to the arch it will sit in.
DigitalScan or impressionLearn moreStart a case3D printed 
Laser Sintered Appliances
Sintered Nance
Nance holding arch printed as one frame — bands, palatal wire and button base — with acrylic added at the bench.
DigitalScan or impressionLearn moreStart a case3D printed Laser Sintered Appliances
Sintered Quad Helix
Quad helix on printed bands with lingual sheaths, so the helix can still be removed and adjusted chairside.
DigitalScan or impressionLearn moreStart a case3D printed 
Laser Sintered Appliances
Sintered Rapid Palatal Expander
Bands, arms and connector printed as one frame from the scan, with the expansion screw fitted at the bench. No separators, no band fitting.
DigitalScan or impressionLearn moreStart a case3D printed 
Laser Sintered Appliances
Sintered Space Maintainer
Band-and-loop and distal-shoe designs printed in one piece — no solder joint at the loop, no separator for the child.
DigitalScan or impressionLearn moreStart a case3D printed Laser Sintered Appliances
Sintered Transpalatal Arch
TPA with bands and arch printed together; the omega loop is designed in, not bent in.
DigitalScan or impressionLearn moreStart a case